Program Example For The I/O Data Exchange Function (When Mounted On A Remote I/O Station) - Mitsubishi Electric Melsec Q Series User Manual

7
PROGRAMMING
QJ71LP21-25
QX42
QJ71PB92V
7.8 Program Example When Mounting the QJ71PB92V on a MELSECNET/H Remote I/O Network

7.8.1 Program example for the I/O data exchange function (When mounted on a remote I/O station)

* 1 Modules are installed in order from slot 0 as shown in the figure, and the following start I/O Nos.
are to be set.
Figure 7.21 I/O Assignment in Program Example (Remote Master Station)
Table7.56 Assignment of Input and Output Signals (Remote Master Station)
Module
* 2 The QJ71PB92V is to be installed in slot 0 of the base unit as shown in the figure, with the start I/O
No. set to 00 .
H
Figure 7.22 I/O Assignment in Program Example (Remote I/O Station)
Table7.57 Assignment of Input and Output Signals (Remote I/O Station)
Module
Input signal
X00 to X1F
X20 to X5F
Input signal
X00 to X1F
Output signal
Y00 to Y1F
Output signal
Y00 to Y1F
7
- 60
1
2
3
4
5
6
7
8