Mitsubishi Electric Melsec Q Series User Manual page 27

Profibus-dp master module
Hide thumbs Also See for Melsec Q Series:
Table of Contents

Advertisement

2
SYSTEM CONFIGURATION
(2) Supported software packages
System
Single CPU system
Q00J/Q00/Q01CPU
Multiple CPU system
Q02/Q02H/Q06H/
Single CPU system
Q12H/Q25HCPU
Multiple CPU system
Single CPU system
Q02PH/Q06PHCPU
Multiple CPU system
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Q12PRH/Q25PRHCPU Redundant system
Q00UJCPU
Single CPU system
Q00U/
Single CPU system
Q01UCPU
Multiple CPU system
Single CPU system
Q02UCPU
Multiple CPU system
Q03UD/Q04UDH/
Single CPU system
Q06UDHCPU
Multiple CPU system
Single CPU system
Q10UDH/Q20UDHCPU
Multiple CPU system
Single CPU system
Q13UDH/Q26UDHCPU
Multiple CPU system
Q03UDV/Q04UDV/
Single CPU system
Q06UDV/Q13UDV/
Multiple CPU system
Q26UDVCPU
Q03UDE/Q04UDEH/
Single CPU system
Q06UDEH/Q13UDEH/
Multiple CPU system
Q26UDEHCPU
Q10UDEH/
Single CPU system
Q20UDEHCPU
Multiple CPU system
Q50UDEH/
Single CPU system
Q100UDEHCPU
Multiple CPU system
When the CPU is mounted on a MELSECNET/H
remote I/O station
The following shows the compatibility between software packages and the system
using the QJ71PB92V.
GX Developer or GX Works2: For setting QCPU parameters and creating sequence
programs (required)
GX Configurator-DP: Configuration software for the QJ71PB92V (required)
Table2.2 Supported software packages
GX Developer
Version 7 or later
Version 8 or later
Version 4 or later
Version 6 or later
Version 8.68W or later
Version 7.10L or later
Version 8.17T or later
Version 8.76E or later
Version 8.48A or later
Version 8.76E or later
Version 8.62Q or later
Not available
Version 8.68W or later
Version 8.76E or later
Not available
Version 6 or later
* 1 The operation mode of the QJ71PB92V cannot be changed using GX Configurator-DP Version
7.03D or later.
Change the mode using Operation mode change request area (Un\G2255).
* 2 For how to use GX Configurator-DP and GX Works2 together, refer to the GX Configurator-DP
Version7 Operating Manual.
* 3 To mount the QJ71PB92V on an extension base unit, use GX Configurator-DP Version 7.03D or
later.
2.1 Applicable System
Software version
*1
GX Configurator-DP
Version 1.11M or later
Version 1.14Q or later
Version 7.00A or later
Version 1.11M or later
Version 1.14Q or later
Version 7.04E or later
Version 1.86Q or later
Version 7.00A or later
*3
Version 7.00A or later
Version 1.11M or later
Version 7.04E or later
Version 1.14Q or later
Version 1.11M or later
Version 7.03D or later
Version 1.14Q or later
Version 1.11M or later
Version 7.02C or later
Version 1.14Q or later
Version 1.11M or later
Version 7.04E or later
Version 1.14Q or later
Version 1.11M or later
Version 7.03D or later
Version 1.14Q or later
Version 7.09K or later
Version 1.95Z or later
Version 1.11M or later
Version 7.03D or later
Version 1.14Q or later
Version 1.11M or later
Version 7.04E or later
Version 1.14Q or later
Version 7.07H or later
Version 1.25B or later
Version 7.00A or later
Version 1.34L or later
1
2
*2
GX Works2
3
4
5
6
7
8
2
- 3

Advertisement

Table of Contents
loading

Table of Contents