Error Codes E600H To E6Ffh (Error Codes Generated When Executing Time Control) - Mitsubishi Electric Melsec Q Series User Manual

9
TROUBLESHOOTING
9.5.5 Error codes E600
time control)
Error Code
E600 The request code is incorrect.
H
E601 No clock data have been written from another time master.
H
E602
H
E603
H
Hardware failure
E604
H
E605
H
E606 A set value of the time master is invalid.
H
The UTC second value set in the Time control setting
E611 request area (Un\G26784 to Un\G26792) is out of the
H
range.
E612
H
E613
H
E614
H
E615
H
Hardware failure
E622
H
E623
H
E624
H
E625
H
E626 Incorrect Year (At the time of write request)
H
E627 Incorrect Month (At the time of write request)
H
E628 Incorrect Day (At the time of write request)
H
E629 Inconsistent Date (At the time of write request)
H
E62A Incorrect Hour (At the time of write request)
H
E62B Incorrect Minute (At the time of write request)
H
E62C Incorrect Second (At the time of write request)
H
Clock data is out of the range. (At the time of write
E62D
H
request)
9
- 24 9.5 Error Codes

9.5.5 Error codes E600H to E6FFH (Error codes generated when executing time control)

to E6FF
H H
Table9.8 Error codes E600
Error Description
(Error codes generated when executing
to E6FF
H H
Check if the request code is correct, and retry.
After writing clock data from another time master, execute
the time data read request again.
Please consult your local Mitsubishi representative.
Modify it so that the time master can read it out, and then
retry.
Check if the UTC second value is correct, and retry.
( Section 7.6.2)
Please consult your local Mitsubishi representative.
Check if the request data is correct, and retry.
Error codes E600 to E62D
H H
Action