Mitsubishi Electric Melsec Q Series User Manual page 151

4
FUNCTIONS
Connect a PROFIBUS cable to the QJ71PB92V.
Connect the PROFIBUS cable to a slave station, and
start up the slave station.
Change the operation mode of the QJ71PB92D to a mode
that allows communications with slave station.
Start the I/O data exchange.
Has the I/O data exchange
*1 Start I/O data exchange by either of the following methods:
Turn ON the exchange start request signal (Y00).
Start it from GX Configurator-DP.
1)
*1
been started normally?
(Check the LEDs.)
Yes
Completed
Figure 4.34 Procedures before System Operation (Continued)
4.9 QJ71PB92D-Compatible Function
Section 6.2
No (Check the parameter settings.)
1
2
3
2)
4
5
6
7
8
4
- 42