Number Of Set Automatic Refresh Parameters - Mitsubishi Electric Melsec Q Series User Manual

6
PARAMETER SETTING

6.6.4 Number of set automatic refresh parameters

There are restrictions on the number of automatic refresh parameters that can be set for
QCPUs.
This section describes the number of automatic refresh parameters that can be set for
QCPUs and the QJ71PB92V.
(1) Number of automatic refresh parameter settings for QCPUs
When multiple intelligent function modules are mounted, the number of automatic
refresh parameter settings must not exceed the following limit.
Table6.10 Number of settable automatic refresh parameters
CPU type
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q00UJ/Q00U/Q01UCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q10UDH/Q13UDH/
Q20UDH/Q26UDH/Q03UDV/Q04UDV/Q06UDV/
Q13UDV/Q26UDV/Q03UDE/Q04UDEH/
Q06UDEH/Q10UDEH/Q13UDEH/Q20UDEH/
Q26UDEH/Q50UDEH/Q100UDEHCPU
MELSECNET/H remote I/O station
6.6 Automatic Refresh Parameters
6.6.4 Number of set automatic refresh parameters
Number of settable automatic refresh
parameters
256
256
256
256
256
1024
2048
256
1
2
3
4
5
6
7
8
6
- 20