Packing List - Mitsubishi Electric Melsec Q Series User Manual

Term
Bus cycle time
Ident No.
UTC
Time master
System A
System B
Control system
Standby system
New control system
New standby system
QJ71PB92D-compatible
function
QJ71PB92D The QJ71PB92D type PROFIBUS-DP interface module

PACKING LIST

Model
QJ71PB92V
PROFIBUS-DP processing time for the DP-Master to perform cyclic communication with each
DP-Slave
A specific number for each module that is connected to PROFIBUS-DP
Ident No. is described in a GSD file of each module.
The UTC is based on the UTC, which stands for Coordinated Universal Time.
In order to adjust the time gap with the GMT (Greenwich Mean Time), the "leap second" has
been added.
A master station that can send a request for time control. (QJ71PB92V, etc.)
The system to which the system-A connector of the tracking cable is connected.
The system to which the system-B connector of the tracking cable is connected.
The system that is controlling the redundant system and performing network communication
The system for backup in the redundant system
The system changed from the standby system status to the control system status due to system
switching
The system changed from the control system status to the standby system status due to system
switching
The function used to replace the QJ71PB92D with the QJ71PB92V
The QJ71PB92V type PROFIBUS-DP master module has this function.
The following indicates the packing list of the QJ71PB92V.
QJ71PB92V PROFIBUS-DP master module
Description
Product name Quantity
1
A
- 17