Mitsubishi Electric Melsec Q Series User Manual page 194

7
PROGRAMMING
The transmission speed is set.
Set the FDL address of the QJ71PB92V.
Set the I/O No. of the QJ71PB92V.
(In 3 digits)
Set the FDL address of the DP-Slave.
Set this for normal DP-Slave.
7
- 5 7.1 I/O Data Exchange Program Examples
(c) Parameter settings on GX Configurator-DP
<Master parameters>
<Slave parameters>
Figure 7.4 Example of I/O Data Exchange Parameter Settings
Set the I/O data size.