Adjustment Of Tracking Starting Possible Area - Mitsubishi Electric CR750-D Series Instruction Manual
Circular arc tracking function
Hide thumbs
Also See for CR750-D Series:
- Instruction manual (126 pages) ,
- Instruction manual (730 pages) ,
- Instruction manual (56 pages)
Table of Contents
Advertisement
9 Setting of an operating condition and operations check ("1"Program)
9.5.
Adjustment of Tracking starting possible area
In automatic operation, if you want to adjust the Tracking starting possible area that was taught in the "8
Teaching Operation("A1"
(1)
Start the "Program monitor" of RT ToolBox2.
(2)
Click the [Add] button and
and then click the [OK] button.
Others,
"M_TrkEnd(1)", "M_TrkStop(2)"
(3)
Double-click the variable you want to change, and change the value in the displayed "Changing Values"
screen.
Assume that the traveling direction of the turntable "plus", enter the distance you want to correct, and then
click [OK].
9-64 Adjustment of Tracking starting possible area
Program)",
change the following procedure.
open the "Add display variables" screen.
*In (), specify the [condition number].
Enter the following three state variables,
Advertisement
Table of Contents
