Patient And Clinician Data Messages - Welch Allyn Connex Spot Monitor Directions For Use Manual

Directions for use

Patient and clinician data messages

Message
Unable to identify
clinician. No provider
configured at host.
Unable to identify
clinician. Security
provider error.
Unable to identify
clinician. User not
found.
Unable to identify
clinician. Invalid ID or
system password.
Unable to identify
clinician. Account
disabled/expired.
Unable to identify
clinician. Password
expired/reset required.
Unable to identify
clinician. Group
membership error.
Unable to identify
clinician.
Touch Clear to delete all
data.
Unable to identify
patient.
Touch Clear to delete all
data.
Database schema out of
data; recreating.
Database is unreadable
during startup;
recreating. 1F0001
Error accessing PDM
database; restarting
PDM. 1F0002
Maximum number of
patient records + Oldest
record overwritten.
Possible cause
Clinician authentication failure
Clinician authentication failure
Clinician authentication failure
Clinician authentication failure
Clinician authentication failure
Clinician authentication failure
Clinician authentication failure
Clinician authentication failure
Patient authentication failure
The database was cleared due to
a schema update
The database was unreadable
during startup
Database corrupted when device
is in operation
Data was deleted as it contained
more than 400 records
Suggested action
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Information status message; press OK button
to dismiss.
Press OK button to dismiss.
Press OK button to dismiss.
Information status message; press OK button
to dismiss.
Troubleshooting 115
Alarm
priority
Information
Information
Information
Information
Information
Information
Information
Information
Information
Information
Very low
Very low
Information