Alarm Messages And Priorities - Welch Allyn Connex Spot Monitor Directions For Use Manual

52 Alarms
•
3. To reset alarm settings to the original configuration, touch Alarm reset.

Alarm messages and priorities

The following table lists the physiological alarm messages and their priorities.
See "Troubleshooting" for technical alarm messages.
Physiological alarms
Alarm messages
Alarm limit exceeded. NIBP systolic HIGH.
Alarm limit exceeded. NIBP systolic LOW.
Alarm limit exceeded. NIBP diastolic HIGH.
Alarm limit exceeded. NIBP diastolic LOW.
Alarm limit exceeded. NIBP MAP HIGH.
Alarm limit exceeded. NIBP MAP LOW.
Alarm limit exceeded. Pulse rate HIGH.
Alarm limit exceeded. Pulse rate LOW.
Alarm limit exceeded. SpO2 HIGH.
Alarm limit exceeded. SpO2 LOW.
Alarm limit exceeded. Temperature HIGH.
The in the Device Status area indicates alarm audio turned off, and a
similar bell will appear in the parameter frames
occurs, the bell will be red or amber in the alarming frame, according to the
priority of the alarm, as shown here:
To modify the volume of audio alarms: Select the volume button next to either
High, Medium, or Low.
An audio tone sounds briefly to indicate the volume level.
Note Periodically test the speaker by selecting different
speaker volumes and listening for the different tones.
Connex
. If an alarm condition
or .
Priority
High
High
High
High
High
High
High
High
High
High
High
®
Spot Monitor