Troubleshooting; Nibp Messages - Welch Allyn Connex Spot Monitor Directions For Use Manual

Troubleshooting

This section presents tables of technical alarm and information messages, as well as
problem descriptions that do not generate messages, to help you troubleshoot issues on
the monitor.
Note
When the monitor detects certain events, a message appears in the Device Status area
at the top of the screen. Below are the message types.
• Information messages, which appear on a blue background.
• Very low-priority alarms, which appear on a cyan background.
• Low- and medium-priority alarms, which appear on an amber background.
• High-priority alarms, which appear on a red background.
Technical alarm messages are low or very low priority unless noted in the Message
column.
Alarm logs are not viewable by clinicians. However, all logs are transferred to Welch
Allyn on a regularly scheduled basis. In the event of an unplanned power failure, all
information, including device logs and patient data, are retained on the system.
You can dismiss a message by touching the message on the screen or, for some
messages, you can wait for the message to time out.
To use these tables, locate the message that displays on the monitor in the left column
of the table. The remainder of the row explains possible causes and suggests actions
that can resolve the issue.
Note

NIBP messages

Message
User cancelled NIBP
reading.
NIBP not functional.
050002
Problem descriptions without messages appear at the end of this section.
Instructions to "Call for service" in the following tables mean that you
should contact qualified service personnel in your facility to investigate the
issue.
Possible cause
The NIBP measurement was
cancelled by user
The NIBP measurement is not
available
Suggested action
Clear the alarm and retry NIBP.
Internal malfunction. If the problem
persists, replace the module.
89
Alarm priority
Information
Medium