Welch Allyn Connex Spot Monitor Directions For Use Manual page 55

Directions for use
Icons in parameter frames
Icon
Icons in the Device Status area
The icons in the Device Status area are black and white, but the background area
changes color to indicate the alarm priority. Messages accompany these icons. These
icons can be controls or status indicators.
Icons in the Device Status area
Icon
Name and status
Alarm off.
No visual or audio alarms or Nurse Call notification will occur for this parameter.
Alarm on.
Audio and visual notifications and Nurse Call are enabled.
Alarm audio off.
Only visual notifications, including Nurse Call, will occur.
Alarm audio paused.
The default audio pause alarm duration is 1 minute. The icon remains until the paused time counts
down to 0. Authorized personnel can configure this parameter.
Name and status
Alarm active.
One or more alarms are active. Touch this icon to pause or turn off the audio tone.
Alarm audio off.
Audio signals are disabled, but alarm limits and visual alarm signals remain active.
Multiple alarms toggle.
Touch this icon to cycle through the messages for each active alarm.
Alarm audio paused.
The audio tone is paused for a period ranging from 90 seconds to 15 minutes. The icon remains
until the paused time counts down to 0. Touch this icon to reset the pause interval. The pause
interval is determined by settings in the Advanced tab.
Alarms 49