Intervals - Welch Allyn Connex Spot Monitor Directions For Use Manual

56 Patient monitoring
3. Proceed to the additional parameter and enter the required information either
manually or enter the data with the format presented.
4. If there is a required parameter that you choose not to complete, then touch Skip.
An override dialog box appears explaining that it is a required parameter and the
EMR will note that it was not captured.
5. Touch Cancel, return and complete the parameter, or touch OK to continue to the
next parameter.
6. Once all parameters on the screen are completed or skipped, touch Next to proceed
to the next screen.
There may be several screens with required parameters.
7. Once all required parameters have been completed or skipped, optional parameters
may appear. Since optional parameters are not required, the Next button is active on
each screen with optional parameters. Complete the optional parameters as
appropriate for your patient.
8. When you are finished, touch Next.
A screen appears that gives you the option of sending data to a laptop, if it is
Bluetooth
9. Touch Save to save the data to the monitor. If you are connected to a laptop, the
data is downloaded automatically.

Intervals

The monitor can capture NIBP and SpO2 measurements automatically, based on
intervals you choose on the Settings tab.
In Settings, the Intervals tab provides all intervals features. You can access this tab from
the Office and Intervals profiles.
In the Intervals profile, you can set three types of intervals:
• Automatic
• Program
• Stat
In the Office profile, you can set Averaging intervals.
You can do the following from the Intervals tab.
• Configure intervals
• Turn off intervals
When the measurement is complete, the frame for that parameter displays the
measurement until the next measurement is complete.
Note
The Intervals button changes to a timer, which counts down to the next automatic
measurement.
Automatic measurements continue until you turn off intervals.
®
enabled, or saving the data to the monitor.
During intervals, each automatic and manual save of patient measurements
clears all measurements from the Manual parameters frame.
®
Connex Spot Monitor