Welch Allyn Connex Spot Monitor Directions For Use Manual page 113

Directions for use
Message
Temperature not functional.
30208
Temperature not functional.
30209
Temperature not functional.
3020A
Temperature not functional.
3020B
Temperature not functional.
30503
Temperature not functional.
30504
Temperature not functional.
30509
Temperature not functional.
3050C
Temperature not functional.
30516
Temperature not functional.
30518
Temperature not functional.
30519
Temperature not functional.
3051A
Possible cause Suggested action
requires an object, but
did not contain one.
The temperature Internal malfunction. If the problem
module object provided persists, replace the module.
with the message could
not be deserialized.
The temperature Internal malfunction. If the problem
module object could not persists, replace the module.
be serialized.
The temperature Internal malfunction. If the problem
module message is persists, replace the module.
performing a request/
action when the
module state prohibits
the request/action.
The temperature Internal malfunction. If the problem
module requested item persists, replace the module.
is not currently
available due to the
module state.
The temperature Internal malfunction. If the problem
module factory persists, replace the module.
settings, and
calibration information
is corrupt.
The temperature Internal malfunction. If the problem
module user settings persists, replace the module.
are corrupt.
The temperature Internal malfunction. If the problem
module calibration is persists, replace the module.
not set.
The temperature Internal malfunction. If the problem
module error log is persists, replace the module.
corrupt.
A hardware Internal malfunction. If the problem
malfunction on the persists, replace the module.
temperature module
has been detected.
The temperature Internal malfunction. If the problem
module power rail is persists, replace the module.
too low.
The temperature Internal malfunction. If the problem
module power rail is persists, replace the module.
too high.
The temperature Internal malfunction. If the problem
module reference persists, replace the module.
voltage circuit was
Troubleshooting 107
Alarm priority
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low