Welch Allyn Connex Spot Monitor Directions For Use Manual page 119

Directions for use
Message
Temperature not functional.
3F0204
Temperature not functional.
3F0205
Temperature not functional.
3F0206
Temperature not functional.
3F0207
Temperature not functional.
3F0208
Temperature not functional.
3F0209
Temperature not functional.
3F020A
Temperature not functional.
3F020B
Temperature not functional.
3F0503
Temperature not functional.
3F0504
Temperature not functional.
3F0509
Temperature not functional.
3F050C
Temperature not functional.
3F0516
Temperature not functional.
3F0518
Temperature not functional.
3F0519
Possible cause Suggested action
No parameter provided Internal malfunction. If the problem
for the specified persists, replace the module.
message.
The parameter provided Internal malfunction. If the problem
is invalid for the persists, replace the module.
specified message.
The parameter provided Internal malfunction. If the problem
is outside of the persists, replace the module.
allowable range for the
specified message.
The message requires Internal malfunction. If the problem
an object, but did not persists, replace the module.
contain one.
The object provided Internal malfunction. If the problem
with the message could persists, replace the module.
not be deserialized.
The object could not be Internal malfunction. If the problem
serialized. persists, replace the module.
The message is Internal malfunction. If the problem
performing a request/ persists, replace the module.
action when the
module state prohibits
the request/action.
The requested item is Internal malfunction. If the problem
not currently available persists, replace the module.
due to the module
state.
The factory settings, Internal malfunction. If the problem
and calibration persists, replace the module.
information is corrupt.
The user settings are Internal malfunction. If the problem
corrupt. persists, replace the module.
The calibration is not Internal malfunction. If the problem
set. persists, replace the module.
The error log is corrupt. Internal malfunction. If the problem
persists, replace the module.
A hardware Internal malfunction. If the problem
malfunction has been persists, replace the module.
detected
The module power rail Internal malfunction. If the problem
is too low. persists, replace the module.
The module power rail Internal malfunction. If the problem
is too high. persists, replace the module.
Troubleshooting 113
Alarm
priority
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low
Very low