Proxim Tsunami MP-8100 Series Reference Manual page 82

Error Type
CRITICAL
CRITICAL
CRITICAL
CRITICAL
CRITICAL
CRITICAL
CRITICAL
CRITICAL
CRITICAL
ALERT
ALERT
ALERT
ALERT
Tsunami MP-8100 Reference Manual
Message
For WORP - ReTransmission
Count: 'Count Value' & Msg
Response Time:' Response
Time Value' values are not valid
Security Profile: 'Profile Name':
In High Throughput Modes,
WEP/TKIP Encryption Types are
not Supported
Security Profile: 'Profile Name':
TKIP/AES Encryption Types will
accept only 16 Ascii characters
or 32 Hex digits
Security Profile: 'Profile Name':
All the 4 Encryption Keys are
not of Same Length
Wireless Interface Invalid
Regulatory Domain
Country Code Not Set
RADIO ['radio number']
CALIBRATION DOESNOT
MATCH WITH MFG DATA
REGDOMAIN
Failed in Committing Wireless
Parameters.
Failed in Wireless Initialization.
Wireless: Tx Rate <data rate>,
Power Level <power level>dBm
Security Profile <profile name>
is Disabled - No Security
Configuration is Applied
Soft Reset Parameter Modified
End of DFS Wait Period on
Channel <channel number>
for Device ath0
Description
Retransmission count and
Message Response time values
configured are not valid.
Reduce the throughput rates to
enable encryption with WEP or
TKIP.
Security Key for TKIP or AES
encryption type will accept only
16 ASCII characters or 32
Hexadecimal digits for Security
Profile mentioned.
For the security profile
mentioned, make sure all the
four encryption keys are of the
same length.
Invalid Regulatory Domain is set
for wireless interface
Country Code is not set.
Regulatory Domain does not
match with the radio
calibration.
Event Log Error Messages
Corrective Action
Check your configuration
and try again to commit
the changes.
If Security is required,
throughput rate has to be
configured to a lesser
value.
Check your configuration
and commit the changes
again.
Check your configuration
and commit the changes
again.
Check your configuration
and the license file before
retrying.
Set Country code to
enable wireless.
Check your license file
and the configuration
before retrying.
Correct the Configuration
and Commit if anything is
found invalid/Reboot the
device(After rebooting,
device will come with old
configuration).
Reboot the Device.
Not required.
Not required.
Not required.
Not required.
82