Proxim Tsunami MP-8100 Series Reference Manual page 16

Wireless IP Config Table Configuration
Wireless IP settings can be configured only in Routing Mode of BSU and SU.
System Name(config-net-ip)# wireless-ip-table
System Name(config-net-ip-wirelessconfig)# index 1 ip 169.254.131.132
System Name(config-net-ip-wirelessconfig)# index 1 mask 255.255.255.0
System Name(config-net-ip-wirelessconfig)# exit
System Name(config-net-ip)# exit
System Name(config-net)# exit
System Name(config)# exit
System Name# show ip
System Name# show ip
// IP CONFIGURATION //
Ip Address
Mask
Address Type
// IP Gateway Configuration//
Gateway IP Address
// WIRELESS IP CONFIGURATION //
INDEX 1
Ip Address
Mask
Default Gateway Configuration
System Name(config-net-ip)# default-gateway 169.254.128.1
System Name# show ip
// IP CONFIGURATION //
Ip Address
Mask
Address Type
// IP Gateway //
Gateway IP Address
RIP Status and RIP Config Table
Enter the following commands to configure and enable RIP. Note that RIP is configurable only when the device is in Routing
Mode and Network Address Translation (NAT) is disabled.
Configuring RIP Status
System Name(config-net)# rip
System Name(config-net-rip)# status enable
Tsunami MP-8100 Reference Manual
: 10.0.0.1
: 255.255.255.0
: static
: 169.254.128.1
: 169.254.128.12
:255.255.255.0
: 10.0.0.1
: 255.255.255.0
: static
: 169.254.128.1
Command Line Interface
16