Proxim Tsunami MP-8100 Series Reference Manual page 29

Wireless Inactivity Timer
Enter the following command to configure the Wireless inactivity timer.
System Name(config)# wireless
Possible completions:
mimo
exit
properties
wireless-timer
worp
System Name(config-wireless)# wireless-timer 5
Note: Setting the Wireless Inactivity Timer to 0 disables the timer.
System Name(config-wireless)#exit
System Name(config)#exit
System Name# show wireless wireless-timer
// WIRELESS IN-ACTIVITY INFORMATION //
Wireless In Activity Timer
1.5.4.5 Radius
Security Radius Server Profile Table
Enter the following command to configure the Security Radius Server Profile table entries.
System Name(config)# radius
System Name(config-rad)#server-table
System Name(config-rad-server)# rowedit 1 secondary-index 1 entry-status enable
System Name(config-rad-server)# rowedit 1 secondary-index 1 ipaddress 169.254.128.133
System Name(config-rad-server)# rowedit 1 secondary-index 1 port 1200
System Name(config-rad-server)# rowedit 1 secondary-index 1 shared-secret public
System Name(config-rad)#exit
System Name(config-rad)#exit
System Name(config)#exit
System Name# show security radius-server
// RADIUS SERVER TABLE CONFIGURATION //
INDEX 1.1
Profile Type
Ipaddress
Port
Shared Secret
Entry Status
INDEX 1.2
Profile Type
Ipaddress
Port
Shared Secret
Entry Status
Tsunami MP-8100 Reference Manual
mimo Configuration
Exits Back to Global Configure Mode
Properties Configuration
Wireless Inactivity Timer Configuration
Worp Configuration
: primaryauthticationserver
: 169.254.128.133
: 1200
: ******
: enable
: secondaryauthenticationserver
: 169.254.128.134
: 1812
: ******
: disable
: 5
Command Line Interface
29