Proxim Tsunami MP-8100 Series Reference Manual page 25

1.5.4.3 Ethernet
Enter the following commands to configure the Ethernet parameters:
System Name(config)# ethernet
System Name(config-ether)#?
Possible completions:
exit
inactivity-timer
rowedit
System Name(config-ether)# inactivity-timer 450
System Name(config-ether)# rowedit 1 txmodeandspeed 1
System Name(config-ether)#exit
System Name(config)#exit
System Name# show ethernet
// ETHERNET INTERFACE CONFIGURATION //
INDEX 1
Mac Address
Supported Speed
Supported Tx Mode
Tx Mode and Speed
INDEX 2
Mac Address
Supported Speed
Supported Tx Mode
Tx Mode and Speed
Ethernet Inactivity Timer
NOTE: Here, unknown speed and mode indicates that the Ethernet link is down.
1.5.4.4 Wireless
Properties Table
Enter the following commands to configure the wireless properties table parameters in Interface 1.
Tsunami MP-8100 Reference Manual
Exits Back to Global Configure Mode
Configure Ethernet Inactivity Timer
Enter row number to edit
: 00:20:a6:c1:65:7e
: hundredMbit
: fullDuplex
: auto
: 00:20:a6:c1:65:7f
: unknown
: unknown
: auto
: 450
Command Line Interface
25