Proxim Tsunami MP-8100 Series Reference Manual page 79

Point-to-multipoint
Hide thumbs Also See for Tsunami MP-8100 Series:
Table of Contents

Advertisement

Error Type
ERROR
ERROR
ERROR
INFO
ERROR
ERROR
INFO
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
Tsunami MP-8100 Reference Manual
Message
tftp: Read on the new
firmware failed
Image size not equal to bytes
read
Image flashing failed
tftp: System is going to reboot
Image ID Does not Match
Unable to create 'image name'
file
'image name' File Write Error
Unable to Close the 'image file'
File
Error in Flash write
TFTP operation in progress...
We couldn't fork a child
process, may be because of
lack of memory
Couldn't create the status file
Invalid Config ID returned by
Flash module
File Name given is not valid [
~`!$^&*()=|\\{}[];\"'<>? ]
should be avoided in filenames
Description
Firmware file not readable;
hence invalid.
Download operation is not
successful.
Not able to save the image.
Image file successfully written to
flash after download and system
is going to reboot and come up
with the new image.
Image ID does not match with
the firmware ID in the device.
Unable to create a file with the
given image file name.
Unable to write the image file
obtained into
flash.
Unable to write the image file
obtained into flash.
Unable to write the image file
obtained into flash.
Another operation is selected
while TFTP operation was in
progress.
TFTP operation failure.
TFTP operation failure.
The current configuration file
may belong to an older build.
Avoid any special characters
while providing file name.
Event Log Error Messages
Corrective Action
Check the image file and
the license. Contact
customer support if the
problem persists.
Check network
configuration and retry.
Retry after reboot.
NONE
Check image file and
license before retrying.
Reboot the device and
retry.
Reboot the device and
retry.
Reboot the device and
retry.
Reboot the device and
retry.
Check your configuration
and retry.
Reboot the device and
retry.
Reboot the device and
retry.
While updating the
image, it is advised to
remove the current
configuration.
Check the file name.
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents