•
Deny IPX LSP
•
Deny IP Broadcasts
•
Deny IP Multicasts
The device can filter these protocols in the wireless interface to?Ethernet direction, the Ethernet?to?wireless direction, or in
both directions. You can configure the following advanced filtering options:
System Name (config-filter)#advanced
System Name(config-filter-advanced)# rowedit 1 direction ethernet2wireless
System Name(config-filter-advanced)# rowedit 1 protocol-name Deny IPX RIP
System Name(config-filter-advanced)# rowedit 1 entry-status enable
System Name(config-filter-advanced)#exit
System Name(config-filter)#exit
System Name(config)#exit
System Name# show filtering advanced
// ADVANCED FILTER TABLE CONFIGURATION
INDEX 1
Protocol Name
Direction
Entry Status
INDEX 2
Protocol Name
Direction
Entry Status
INDEX 3
Protocol Name
Direction
Entry Status
INDEX 4
Protocol Name
Direction
Entry Status
INDEX 5
Protocol Name
Direction
Entry Status
Worp Intracell
The following commands are used to "enable" WORP Intracell Configuration and it is configurable only in BSU with bridge
mode.
System Name (config-filter)#worp-intracell
System Name(config-filter-intracell)# intracell-status enable
System Name(config-filter-intracell)#exit
System Name(config-filter)#exit
System Name(config)#exit
System Name(config)#exit
System Name# show filtering worp-intracell intracell-status
Intra cell status : enable
Group Table
The following commands are used to "enable" group table configuration and it is configurable only in BSU with bridge
mode.
Tsunami MP-8100 Reference Manual
: Deny IPX RIP
: ethernet2wireless
: enable
: Deny IPX SAP
: both
: disable
: Deny IPX LSP
: both
: disable
: Deny IP Broadcasts
: both
: disable
: Deny IP Multicasts
: both
: disable
Command Line Interface
35