Proxim Tsunami MP-8100 Series Reference Manual page 54

1.5.5.7 System Information
Enter the following commands to configure the System Information entries.
System Name # configure
System Name(config)#management
System Name(config-mgmt)# system-information
System Name(config-mgmt-sys-sysinfo)# ?
Possible completions:
commit
email
exit
factory-reset
gps-altitude
gps-latitude
gps-longitude
location
phone-number
reboot
restore
system-name
System Name(config-mgmt-sysinfo)# email name@Organization.com
System Name(config-mgmt-sysinfo)# system-name System name
System Name(config-mgmt-sysinfo)# phone-number 1234567890
System Name(config-mgmt-sysinfo)# location systemlocation
System Name(config-mgmt-sysinfo)# gps-altitude 120
System Name(config-mgmt-sysinfo)# gps-latitude 37.3321
System Name(config-mgmt-sysinfo)# gps-longitude -121.8893
System Name(config-mgmt-sysinfo)# factory-reset no
System Name(config-mgmt-sysinfo)#exit
System Name(config-mgmt-sysinfo)# exit
System Name(config-mgmt)# exit
System Name(config)# exit
System Name#
System Name# show system-information
// SYSTEM INFORMATION CONFIGURATION //
Description
Uptime
System Name
Contact Mail
Phone Number
Location Name
Gps Longitude
Gps Latitude
Gps Altitude
Product Description
NOTE: Setting factory-reset to yes or 1 will automatically reboot the device and the device will come up with default
values.
1.5.5.8 TFTP
You can transfer a file to or from the device using TFTP. Make sure that the TFTP server is running and configured to point to
the directory containing the file.
Tsunami MP-8100 Reference Manual
Commit Configuration
System Email Configuration
Exits Back to Global Configure Mode
Factory Reset Configuration
GPS Altitude Configuration
GPS Latitude Configuration
GPS Longitude Configuration
Location Configuration
Phone Number Configuration
Reboot Configuration
System Restore Configuration
System Name Configuration
: System Description
: 0-02:10:17.15
: System Name
: name@Organization.com
: 1234567890
: systemlocation
: -121.8893
: 37.3321
: 120
: Monaco-v1.0.0
Command Line Interface
54