Proxim Tsunami MP-8100 Series Reference Manual page 24

DHCP Relay Sever Table
Enter the following commands to configure the DHCP relay server table.
System Name(config)# dhcp
System Name(config-dhcp)# dhcp-relay
System Name(config-dhcp-relay)# server-table
System Name(config-dhcp-relay-server)# rowadd 0 entry-status
System Name(config-dhcp-relay-server)# rowadd 0 ipaddress 10.0.0.1
System Name(config-dhcp-relay-server)# rowadd 0 entry-status
System Name(config-dhcp-relay-server)#exit
System Name(config-dhcp-relay)#exit
System Name(config-dhcp)#exit
System Name(config)#exit
System Name# show dhcp dhcp-relay server-table
// DHCP RELAY SERVER TABLE CONFIGURATION //
INDEX 1
IP Address
Entry Status
Server Maximum Lease Time Configuration for DHCP
Perform the following commands to configure the DHCP IP maximum lease time.
System Name(config-dhcp)# max-lease-time 0-00:14:24.00
System Name(config-dhcp)#exit
System Name(config)#exit
System Name# show dhcp max-leasetime
Maximum Lease Time
DHCP Server Status Configuration
Enter the following commands to configure the DHCP server status.
System Name(config-dhcp)# server-status disable
System Name(config-dhcp)#exit
System Name(config)#exit
System Name#
System Name# show dhcp server-status
DHCP Server Status
Tsunami MP-8100 Reference Manual
: 10.0.0.1
: enable
: 0-00:14:24.00
: disable
Command Line Interface
24