Proxim Tsunami MP-8100 Series Reference Manual page 52

1.5.5.2 Access Table
System Name(config-mgmt)# access-table
System Name(config-mgmt-tbl)# rowadd 0 entry-status 4
System Name(config-mgmt-tbl)# rowadd 0 ipaddress 10.0.0.1
System Name(config-mgmt-tbl)# rowadd 0 entry-status 4
1.5.5.3 Access Table Status
System Name(config-mgmt)# access-tbl-status enable
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show access-ctrl
// ACCESS CONTROL CONFIGURATION //
All Access Control
Http Access Control
Https Access Control
Snmp Access Control
Telnet Access Control
SSH
Mgmt Access Status
// Management Access Table Configuration //
INDEX 1
Ip Address : 10.0.0.1
Status
1.5.5.4 HTTP
Perform the following commands to configure the http password, port number for Telnet.
System Name# configure
System Name(config)# management
System Name(config-mgmt)# http
System Name(config-mgmt-http)# password public123
System Name(config-mgmt-http)# port 123
System Name(config-mgmt-http)#exit
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show http
// HTTP CONFIGURATION
Password
Port
Tsunami MP-8100 Reference Manual
: enable
: enable
: enable
: enable
: enable
Access Control : enable
: disable
: enable
//
: ******
: 123
Command Line Interface
52