Proxim Tsunami MP-8100 Series Reference Manual page 30

Security Radius Supported Table
Enter the following command to configure the Security Radius Supported table entries.
System Name(config)# radius
System Name(config-rad)#supported-table
System Name(config-rad-supported)# rowedit 1 entry-status enable
System Name(config-rad-supported)# rowedit 1 max-retransmissions 3
System Name(config-rad-supported)# rowedit 1 mes-response-time 3
System Name(config-rad-supported)# rowedit 1 re-authentication 0
System Name(config-rad-supported)# rowedit 1 profile-name defaultradius
System Name(config-rad-supported)#exit
System Name(config-rad)#exit
System Name(config)#exit
System Name# show security radius-supported
// RADIUS SUPPORTED TABLE CONFIGURATION //
INDEX 1
Profile Name
Max Retransmissions
Message Response Time
Re Authentication Period
Entry Status
1.5.4.6 Wireless Security
Enter the following command to configure a Security-Wireless Config table entries.
System Name (config)#security
System Name (config-sec)#wireless-config-table
System Name (config-sec-tbl)#rowadd 0 authentication-mode worp
System Name (config-sec-tbl)#rowadd 0 encryption-type wpa2-aes
System Name (config-sec-tbl)#rowadd 0 entry-status enable
System Name (config-sec-tbl)#rowadd 0 key-index 4
System Name (config-sec-tbl)#rowadd 0 key1 ~!@#$%^&*()_+|{}
System Name (config-sec-tbl)#rowadd 0 key2 ~!@#$%^&*()_+|{}
System Name (config-sec-tbl)#rowadd 0 key3 ~!@#$%^&*()_+|{}
System Name (config-sec-tbl)#rowadd 0 key4 ~!@#$%^&*()_+|{}
System Name (config-sec-tbl)#rowadd 0 network-secret public
System Name (config-sec-tbl)#rowadd 0 profile-name Security1
System Name# show security wireless-config
// SECURITY WIRELESS CONFIG TABLE CONFIGURATION //
INDEX 1
Profile Name
Authentication Mode
Key Index
Encryption Type
Entry Status
Network Secret
key 1
Key 2
Key 3
Key 4
INDEX 2
Profile Name
Authentication Mode
Key Index
Encryption Type
Entry Status
Network Secret
key 1
Key 2
Key 3
Key 4
Tsunami MP-8100 Reference Manual
Example
: Default Radius
: 3
: 3
: 0
: enable
: WORP Security
: worp
: four
: wpa2-aes
: enable
: ******
: ******
: ******
: ******
: ******
: Security1
: worp
: four
: wpa2-aes
: enable
: ******
: ******
: ******
: ******
: ******
Command Line Interface
30