Proxim Tsunami MP-8100 Series Reference Manual page 20

Primary DNS, Secondary DNS, and Supported Interfaces
Supported Interfaces Scalar is a read-only parameter, and it displays the interface names that are supported on the device
depending upon the Network Mode (Bridge/Router) in which the device is running. To configure Primary/Secondary Domain
Name Servers on the device, use the following commands.
System Name(config)# network
System Name(config-net)# flush-arptable no
System Name(config-net)# primary-dns-ip 172.18.18.23
System Name(config-net)# secondary-dns-ip 169.234.127.12
System Name(config-net)#exit
System Name(config)#exit
DNS servers configuration and supported interfaces on the device can be shown using the
following Command:
System Name# show network netconfig
// NETCONFIG CONFIGURATION //
Flush ARP Table
All Interfaces Default Router Address
Supported Interfaces
Primary DNS Ip Address
Secondary DNS IP Address
Radio Mode Configuration
The device supports two modes, BSU and SU.
Tsunami MP-8100 Reference Manual
: no
: 192.168.2.1
: br0
: 172.18.18.23
: 169.234.127.12
Command Line Interface
20