Proxim Tsunami MP-8100 Series Reference Manual page 21

System Name(config)# radio-mode
System Name(config-radio)# ?
Possible completions:
exit
interface
System Name(config-radio)# interface 1 ?
Possible completions:
<[Enter]>
radio-mode
System Name(config-radio)# interface 1 radio-mode
% Input Range <ap(1),client(2),wds(3),bsu(4),endPointa(4),su(5),endPointb(5)..Plz refer the
Supported mode radio mode(s).> required
Note: Here you have to configure the radio mode as endPointa or endPointb.
System Name(config-radio)# interface 1 radio-mode 4
Changes in Radio Mode requires Reboot
Changes in Radio Mode resets the Wireless and WORP parameters to default values
System Name(config-radio)#exit
System Name(config)#exit
System Name# show system-type
// SYSTEM COUNTRY CODE,PACKET FORWARD MODE CONFIGURATION
Forwarding Mode
Active Network Mode
// SYSTEM TYPE CONFIGURATION //
RADIO-INDEX 1
Radio Mode
Active Mode
Supported Radio Modes
Supported Frequency Domains
Frequency Domain
Active Frequency Domain
Country Code, Network Mode, and Frequency Domain Configuration
The device can operate in two network modes, they are
•
Bridge Mode
Tsunami MP-8100 Reference Manual
Exits Back to Global Configure Mode
Radio Mode Index
Execute this command
Configure the mode of the radio(s)
: bridge
: bridge
: EndPointA
: EndPpintA
: EndPointA<4>,EndPointB<5>
: 4,9,10,11,13,14,15,6,7,8,12,5
: taiwan5ghz
: taiwan5ghz
Command Line Interface
//
21