Proxim Tsunami MP-8100 Series Reference Manual page 31

1.5.4.7 Filtering
It works only if MP-8100 is configured in bridge mode.
Static Mac Table
System Name # configure
System Name (config)#filtering
System Name (config-filter)# staticmac
System Name (config-filter-staticmac)#rowadd 0 entry-status create
System Name (config-filter-staticmac)#rowadd 0 wired-mac-address 00:11:22:33:44:55
System Name (config-filter-staticmac)#rowadd 0 wired-mac-mask ff:ff:ff:ff:ff:ff
System Name (config-filter-staticmac)#rowadd 0 wireless-mac-address 11:22:33:44:55:67
System Name (config-filter-staticmac)#rowadd 0 wireless-mac-mask
System Name (config-filter-staticmac)#rowadd 0 filter-comment wiredonly
System Name (config-filter-staticmac)#rowadd 0 entry-status create
System Name (config-filter-staticmac)#exit
System Name (config-filter)#exit
System Name (config)#exit
System Name (config)#
System Name# show filtering staticmac
// STATIC MAC ADDRESS FILTER TABLE CONFIGURATION //
INDEX 1
Wired Mac Address
Wired Mac Mask
Wireless Mac Address: 11:22:33:44:55:67
Wireless Mac Mask
Filter Comment
Entry Status
Tsunami MP-8100 Reference Manual
: 00:11:22:33:44:55
: ff:ff:ff:ff:ff:ff
00:00:00:00:00:00
: wiredonly
: enable
Command Line Interface
00:00:00:00:00:00
31