Proxim Tsunami MP-8100 Series Reference Manual page 53

1.5.5.5 Telnet
Enter the following commands to configure the password, sessions, and port number for Telnet.
System Name# configure
System Name(config)# management
System Name(config-mgmt)# telnet
System Name(config-mgmt-tel)# password admin
System Name(config-mgmt-tel)#port 80
System Name(config-mgmt-tel)#sessions 3
The sum of Telent and SSH sessions cannot be more than 10.
System Name(config-mgmt-tel)#exit
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show telnet
// TELNET CONFIGURATION
Password
Port
Sessions
1.5.5.6 SSH
Enter the following commands to configure the sessions and port number for SSH.
System Name# configure
System Name(config)# management
System Name(config-mgmt)# ssh
System Name(config-mgmt-ssh)# port 23
System Name(config-mgmt-ssh)# sessions 5
The sum of Telent and SSH sessions cannot be more than 10.
System Name(config-mgmt-ssh)#exit
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show ssh
// SSH CONFIGURATION
SSH Port
Sessions
Tsunami MP-8100 Reference Manual
//
: ******
: 80
: 3
//
: 23
: 5
Command Line Interface
53