Proxim Tsunami MP-8100 Series Reference Manual page 57

1.5.5.11 Display the Licensed Information
Use the following command to display the licensed information. This is a read only information and cannot be modified.
System Name# show licensed-feature
// LICENSED FEATURE CONFIGURATION //
Product ID
Number of Radios
Number of Ethernet Interfaces
Radio 1 Allowed Frequency Band
Maximum Output Bandwidth
Maximum Input Bandwidth
Maximum Aggregate Bandwidth
Product Family
Product Class
Maximum Slaves Allowed
Allowed Operations Modes of Radio 1
1.5.5.12 SNMP V3 Configuration
System Name# configure
System Name(config)# management
System Name(config-mgmt)# snmp-version snmpv3
System Name(config-mgmt)# v3-auth-password public
System Name(config-mgmt)# v3-auth-protocol sha
System Name(config-mgmt)# v3-priv-password public
System Name(config-mgmt)# v3-priv-protocol aes-128
System Name(config-mgmt)# secure-management disable
System Name(config-mgmt)# read-password public123
System Name(config-mgmt)# read-write-password public123
System Name(config-mgmt)#exit
System Name(config)#exit
System Name# show snmp
System Name# show snmp
// SNMP V3 CONFIGURATION //
Secure Management
SNMP Version
V3 Security Level
V3 Authentication Protocol
V3 Authentication Password
V3 Private Protocol
V3 Private Password
Snmp Read Password
Snmp Read Write Password
Tsunami MP-8100 Reference Manual
= MONACO
= 1
= 2
= 2.4 GHz., 4.9 GHz., 5 GHz.
= 100 Mbps.
= 100 Mbps.
= 200 Mbps.
= QuickBridge
= Outdoor
= 1
= EndPointA, EndPointB
: disable
: snmpv3
: authPriv
: sha
: ******
: aes-128
: ******
: ******
: ******
Command Line Interface
57