Additional (Optional) Fibre Optic Connections - Siemens Argus 7SR21 Technical Manual

7SR21 & 7SR22 - Installation Guide
6.3

Additional (Optional) Fibre Optic Connections

Rear Com ports 3 and 4 comprise Fibre–Optic ST™ (BFOC/2.5) bayonet connectors-4 per product. 62.5 / 125 μm
glass fibre is recommended for all distances.
When installing fibre, ensure that the fibres' bend radii comply with the recommended minimum for the fibre used-
typically 50 mm is acceptable.
Computer or
Control System
USB or 9 pin male
Figure 6.3-1 Data Comms to Multiple Devices Using 7SG24 and F.O. Star Network
Figure 6.3-2 Data Comms to Multiple Devices Using 7SG24 and F.O. Ring Network
The F.O. data communications link with a particular relay will be broken if the relay element is withdrawn from the
case, all other relays will still communicate.
Unrestricted Page 22 of 36
To
Control
System
7SG24
Master
RS232 straight
Through cable
D connector
25 pin male
D connector
Tx
Rx
Rx
Tx
Tx
Rx
Tx
Rx
Tx
Rx
Tx
Rx
62.5/125 µm fibre optic
with ST connectors
©2018 Siemens Protection Devices Limited
Rx
Tx
Rx
Tx