Siemens Argus 7SR21 Technical Manual page 204

1.17. Virtual Meters
Instrument
--------------------
VIRTUAL METERS
> to view
--------------------
V 1-8 ---- ----
V 9-16 ---- ----
1.18. Communication Meters
Instrument
--------------------
COMMUNICATION METERS
> to view
--------------------
COM1
COM2
COM3
COM4
COM1 TRAFFIC
Tx1
Rx1
Rx1 Errors
COM2 TRAFFIC
Tx2
Rx2
Rx2 Errors
COM3 TRAFFIC
Tx3
Rx3
Rx3 Errors
COM4 TRAFFIC
Tx4
Rx4
Rx4 Errors
EN100 INFORMATION
Version : EN100 Version Info
Part# BF1111111111
Network Config
Mac 00000000
IP 000.000.000.000
NM 255.255.255.000
Gateway: 000.000.000.000
EN100 NTP info:
EN100 Link ½ status info:
EN100 Rx/Tx Count
En100 Rx/Tx Error
En100 Rx/Tx 10s
CPU Load %
EN100 Info Meters : 1-n
© 2017 Siemens Protection Devices Limited
Description
This is the sub-group that shows the state of the virtual status inputs in the relay
TEST/RESET ► allows access to this sub-group
Displays the state of Virtual Outputs 1 to 16 (The number of virtual inputs will
vary depending on model)
Description
This is the sub-group that includes all the meters that are associated
with Communications ports TEST/RESET ► allows access to this
sub-group
Displays which com ports are currently active
Displays traffic on Com1
0
0
0
Displays traffic on Com2
0
0
0
Displays traffic on Com3
0
0
0
Displays traffic on Com4
0
0
0
Displays EN100 information
Displays EN100 network information
Displays further EN100 61850 information
Displays further EN100 61850 information
7SR220 Instrumentation Guide
Page 19 of 20