Parameter
Current monitoring reference (Pr. 56)
Set the current to be referenced when the current monitor (inverter output current, etc.) is se-
lected for terminal AM display. Set the full scale value when outputting the current monitor from
terminal AM.
● Set the current value when the voltage output at terminal AM is 10V DC. The analog voltage
output and current value at terminal AM are proportional. (The maximum output voltage is
10V DC.)
10V DC
FR-D700 SC EC
500A
Rated output current
(initial value)
Setting range of Pr. 56
Monitor display and monitor output signals
Fig. 6-64:
Current monitoring reference
I001165E
6 - 119