Mitsubishi Electric FR-D720S SC EC Instruction Manual page 54

Control circuit specifications
Check the condition of the wire end sleeve after crimping. Do not use a wire end sleeve of
which the crimping is inappropriate, or the face is damaged.
Fig. 3-9: Incorrectly crimped wire end sleeves
Wire Size [mm²]
0.75
1.25/1.5
0.75
(for two wires)
Tab. 3-13: Recommended wire end sleeves (Maker: Phoenix Contact Co., Ltd)
A bar terminal with an insulation sleeve compatible with MTW wire which has a thick wire
insulation.
Applicable for terminal ABC
Wire Size [mm²]
Tab. 3-14: Recommended wire end sleeves (Maker: NICHIFU Co., Ltd)
3 - 18
Damaged
With Insulation
Sleeve
0.3
Al 0,5-10WH
0.5
Al 0,75-10GY
1 Al 1-10RD
Al 1,5-10BK
Al-TWIN 2 × 0,75-
10GY
Wire End Sleeve
Product Number
0.3 to 0.75
Crumpled tip
Wire End Sleeve Model
Without Insulation
Sleeve
—
A 0,75-10
A 1-10
A 1,5-10
—
Insulation
Product Number
BT 0.75-11
Unstranded wires
Wires are not inserted
into the shell
Recommended
Wire End Sleeve
For UL Wire
Crimping Tool
—
AI 0,5-10WH-GB
AI 0,75-10GY-GB
CRIMPFOX 6/6T-F
(Maker: Phoenix
AI 1-10RD/1000GB
Contact Co., Ltd)
AI 1,5-10BK/1000GB
—
Recommended Wire End
Sleeve Crimping Tool
VC 0.75 NH 67
Wiring
I001985E