Mitsubishi Electric FR-D720S SC EC Instruction Manual page 409

Parameter
NOTES
Changing the terminal function using any of Pr. 178 to Pr. 182, Pr. 190, Pr. 192 or Pr. 197
may affect the other functions. Make setting after confirming the function of each terminal.
When the Pr. 267 setting was changed, check the voltage/current input switch setting. Differ-
ent setting may cause a fault, failure or malfunction. (Refer to page 6-148 for setting.)
Turn OFF PID output suspension function (Pr. 575 = "9999") while using dancer control.
When Pr. 561 PTC thermistor protection level ≠ "9999", terminal 2 is not available for main
speed command. Terminal 2 is used as PTC thermistor input terminal.
FR-D700 SC EC
Special operation
6 - 259