Mitsubishi Electric FR-D720S SC EC Instruction Manual page 265

Parameter
Display set frequency during stop (Pr. 52)
When "100" is set in Pr. 52, the set frequency and output frequency are displayed during stop
and operation respectively. LED of Hz flickers during stop and is lit during operation.
Output frequency
Output current
Output voltage
Alarm display
Tab. 6-20: Display during running and stop
The set frequency displayed indicates the frequency to be output when the start command
is on. Different from the frequency setting displayed when Pr. 52 = "5", the value based on
maximum/minimum frequency and frequency jump is displayed.
NOTES During an error, the output frequency at error occurrence appears.
During MRS, the values displayed are the same as during a stop.
During offline auto tuning, the tuning status monitor has priority.
FR-D700 SC EC
0
During running/stop
Output frequency
Monitor display and monitor output signals
Parameter 52
100
During stop
Set frequency
Output current
Output voltage
Alarm display
During running
Output frequency
6 - 115