Wiring
Insert the wire into a socket.
When using a stranded wire without a wire end sleeve or a single wire, push a open/close
button all the way down with a flathead screw driver, and insert the wire.
b
CAUTION:
● When using a stranded wire without a wire end sleeve, twist enough to avoid short
circuit with a nearby terminals or wires.
● Place the flathead screwdriver vertical to the open/close button. In case the blade
tip slips, it may cause to damage of inverter or injuries.
FR-D700 SC EC
Open/close button
Flathead
screwdriver
Control circuit specifications
Fig. 3-10:
Cable connection
Fig. 3-11:
Connection of a stranded wire
I001986E
I001987E
3 - 19