Using The Illumination Functions For Edi And Maia; Using The X-Ray Viewer; Using The Bell; Using The Timer - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.9 Using function through the dentist or assistant element
Operation of the 3D joint
4 Turn the switching ring to the left until it snaps into place.
ð Operating light can be rotated 45° to the left or 45° to the right.
4 Turn the switching ring to the right and it will spring back to its original posi-
tion.
ð If the operating light is turned to the centre position (zero position), it
will automatically lock into place in the centre position.

4.9.3 Using the illumination functions for EDI and MAIA

4 Press and hold down the "Operating light" key.
ð Brightness varies between five steps.
4 When the desired brightness is reached, release the "Operating light" key.

4.9.4 Using the X-ray viewer

4 Press the "X-ray viewer" key to turn the X-ray viewer on or off.

4.9.5 Using the bell

4 Press the "Bell" key to activate the bell relay.
ð The bell relay is activated for as long as the key is being pressed.

4.9.6 Using the timer

4 Press the "Timer" key briefly to start or stop the timer.
ð LED flashes while the timer counts down.
78 / 124