Base Bottom Cover - Epson SCARA ROBOT Manipulator Manual

3.8 Base Bottom Cover

The base bottom cover is removed only when replacing the gasket unit.
Unscrew the base bottom cover mounting bolts and remove the cover.
G6-***C* (Cleanroom-model)
Table Top
mounting
Ceiling
mounting
NOTE
A gasket is installed to G6-***D*, P* (Protected-model).

A base bottom cover is not installed to G6-***S* (Standard-model).
G6 Rev.21
6-M3×8
6-M3×8
Maintenance 3. Covers
G6-***D*, P* (Protected-model)
Gasket
6-M3×8
6-M3×8
Gasket
105