I Set Mode - Icom IC-2820H Instruction Manual

14
OTHER FUNCTIONS
I SET MODE items
D D Time-out timer
To prevent accidental prolonged transmission, etc., the trans-
ceiver has a time-out timer. This function cuts a transmission
OFF after 1, 3 or 5 min. of continuous transmission. This timer
can be cancelled.
• OFF : The time-out timer is turned OFF. (default)
• 1, 3, 5 MIN : The transmission is cut OFF after the set
period elapses.
D D Auto power OFF
The transceiver can be set to automatically turn OFF after a
specified period with a beep when no key operations are per-
formed.
30 min, 60 min, 120 min and OFF (default) can be specified.
The specified period is retained even when the transceiver is
turned OFF by the auto power OFF function. To cancel the
function, select "OFF" in this set mode.
D D PTT lock
Turns the PTT lock function ON and OFF(default.)
Transmission with [PTT] is inhibited when ON is selected to
prevent accidental transmission, etc.
109
D D Busy lockout
Turns the busy lockout function ON and OFF(default.)
This function inhibits transmission while receiving a signal or
when the squelch is open
D D Auto repeater
U.S.A./KOREAN versions only
The auto repeater function automatically turns ON or OFF the
duplex operation and tone encoder. The offset and repeater
tone is not changed by the auto repeater function. Reset
these frequencies, if necessary.
U.S.A. version:
• OFF : The auto repeater function is turned OFF.
• RPT1 : Activates for duplex only. (default)
• RPT2 : Activates for duplex and tone.
Korean version:
• OFF : Deactivates the function.
• ON : Activates duplex and tone. (default)
D D Fan control
Selects the cooling fan control condition from AUTO, HI, MID
and LOW.
• AUTO : The fan rotates during transmit and for 2 min.
after transmission.(default)
• HI : The high power fan continuously rotates.
• MID : The middle power fan continuously rotates.
• LOW : The low power.fan continuously rotates.