Icom IC-2820H Instruction Manual page 81

I Digital code and digital call sign setting
D Setting digital code for digital code squelch
or beep
q Push [F F •
] to display the function guide, push the left
band's [V/MHz•SCAN] (Right band's) several times to se-
lect DV mode.
w Push [V/MHz•SCAN] to enter MENU screen, then rotate
main band's [DIAL] to select "DV SET MODE."
e Push [MAIN•BAND], then rotate [DIAL] to select "DIGI-
TAL CODE."
r Push [MAIN•BAND], then rotate [DIAL] to select the de-
sired digital code. (0-99)
• Each operating band and each memory channel have indepen-
dent settings.
Digital code setting
t Push [V/MHz•SCAN] (Right band's) to return to
"DUP/TONE" set mode, or push [F F •
quency indication.
D Setting the YOUR and MY call signs for
digital call sign squelch or beep
See page ?? for DV MODE OPERATION.
CAUTION!: Use digital code squelch when operating with
more than 3 stations. Because the digital call sign squelch
function recognizes "MY CALL SIGN," the digital call sign
squelch function can be used when operating with only one
station.
NOTE:
• The tone/DTCS code squelch opens sometimes when
other stations communicate with adjacent tone frequency
or DTCS code.
] to return to fre-
DTMF MEMORY ENCODER
The optional UT-123
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
64