Icom IC-2820H Instruction Manual page 122

14
OTHER FUNCTIONS
I General
MENU screen is used for programming infrequently changed
values or conditions of functions.
• Entering MENU screen and operation
q Push [F F •
] to display the function guide.
w Push [V/MHz•SCAN] (Right band's) to enter MENU screen.
e Rotate the [DIAL] to select the desired menu group, then
push [MAIN•BAND].
r Rotate the main band's [DIAL] to select the desired item,
then push [MAIN•BAND].
t Rotate the [DIAL] to select the desired condition or value,
then push [MAIN•BAND].
y Push [F F •
] to return to frequency indication or push
[V/MHz•SCAN] (Right band's) to return the back screen.
105
z Push [BAND] to select the main band.
SET
x Push [
B(D-OFF)] to enter set mode.
SET
B
c Push [
B(D-OFF)] or [
SET
the desired item.
v Push [Y] or [Z] to select the condition or value.
b Push [
A(MW)] to exit set mode.
CLR
I Menu list
MENU REF.
†
—
CALL SIGN
†
—
RX CALL SIGN
†
—
DV MESSAGE
†
—
DV VOICE MEMO
p. 93
SET MODE
p. 93
DV SET MODE
p. 93
SCAN
†
Refer to the chapter 11 for detils.
C(T-OFF)] to select
ENT
MENU REF.
p. 94
DUP/TONE...
p. 94
DISPLAY
p. 94
SOUNDS
p. 94
DV GPS
p. 94
PACKET
p. 94
GPS SET MODE