Icom IC-2820H Instruction Manual page 61

I Transferring memory contents
This function transfers a memory channel's contents to VFO
(or another memory/call channel)
for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
qSelect the desired band's
nel.
➥ Push the desired band's [M/CALL•MW] several times to
select memory mode or call channel, then rotate the
same band's [DIAL] to select the desired memory or call
channel.
wPush and hold [M/CALL•MW] for 1 sec. to transfer the se-
lected memory/call channel contents to the VFO.
• VFO mode is selected automatically.
[EXAMPLE]: Transferring memory channel 30 contents to VFO.
Front panel operation:
M/CALL
Push to select memory mode.
MW
HM-133 operation:
Push to select memory mode.
. This is useful when searching
memory or call chan-
(left or right)
Rotate for selecting memory channel.
Select memory channel.
MEMORY OPERATION
z Push [BAND] to select the desired band as
MR/CALL
the main band, if necessary.
x Select the memory/call channel to be
transferred.
MW
➥ Push [MR/CALL] to select memory mode,
then select the desired memory channel
via [Y]/[Z] or keypad.
[Y]/[Z]
➥ Push and hold [MR/CALL] for 1 sec. then
push [Y]/[Z] to select the call channel.
c Push
[FUNC],
[ A(MW)] for 1 sec. to transfer the se-
CLR
lected memory/call channel contents to the
VFO.
• VFO mode is selected automatically.
M/CALL
Push and hold
Push then push and hold
5
then push and hold
(same band's) for 1 sec.
MW
for 1 sec.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
44