Icom IC-2820H Instruction Manual page 118

13
DV MODE OPERATION (Optional UT-123 is required)
D D GPS message automatic transmission
q Enter "GPS AUTO TX" in DV set mode.
➪
MENU screen
(Push [MENU/LOCK]) (Rotate [DIAL]
• GPS AUTO RX screen is displayed.
GPS AUTO TX GPS AUTO TX
OFF OFF
r
5SEC 5SEC
10SEC 10SEC
30SEC 30SEC
1MIN 1MIN
wRotate [DIAL]
†
to select the desired position data transmit-
ting interval from 5 sec., 10 sec., 30 sec., 1 min., 3 min.,
5 min., 10 min., 30 min. and OFF.
• The position data is transmitted only when [PTT] is pushed with
OFF setting, the data is transmitted automatically once every
5 sec., 10 sec., 30 sec., 1 min., 3 min., 5 min., 10 min. and
30 min. when the appropriate setting is selected.
• The GPS message is also transmitted if programmed.
ePush [ï](5)
(or [Ω Ω ](4))
r Push [MENU/LOCK] to return to frequency indication.
NOTE: Your own call sign ("MY") should be set to activate
the GPS automatic transmission.
101
(p. 95)
➪
DV SET MODE GPS AUTO TX
†
, then push [ï](5)
to return to DV SET MODE screen.
D D Position indication
q Enter "POSITION" in message/position set mode.
MENU screen
†
.) (Push [MENU/LOCK]) (Rotate [DIAL]
• GPS POSITION screen is displayed.
GPS POSITION GPS POSITION
MY POSITION MY POSITION
r
34.56.789 N 34.56.789 N
123.45.678 E 123.45.678 E
:BACK :BACK
wRotate [DIAL]
tion.
ePush [ï](5)
screen.
r Push [MENU/LOCK] to return to frequency indication.
➪
MESSAGE/POSITION
†
, then push [ï](5)
:RX POS :RX POS
†
to select the received position data indica-
(or [Ω Ω ](4)) to return to MESSAGE/POSITION
➪
POSITION
†
.)