Icom IC-2820H Instruction Manual page 87

D D Code programming
Your ID code MUST be programmed into code channel C0.
Up to 6 transmit codes (codes that you transmit) are pro-
grammable into code channels, C1 to C5, if required.
q Push [F F •
] to display the function guide.
w Push [V/MHz•SCAN] (Right band's) to enter MENU
screen.
• Rotate [DIAL] to select "DUP/TONE", then push the main band's
[MAIN•BAND].
e Rotate [DIAL] to select
.
[MAIN•BAND]
r Rotate [DIAL] to select code channel C0.
• "C0" is your ID code and "C1" to "C5" are transmit codes.
• Each transceiver should have a different ID code.
t Push the [MAIN•BAND], then rotate [DIAL] to select the
desired 3-digit ID code (default: 000) via the keypad.
• Push [M/CALL•MW] (Left band's) to move the cursor right; push
[V/MHz•SCAN] (Left band's) to move the cursor left.
"PGR CODE", then push the
PAGER/CODE SQUELCH
y Rotate [DIAL] to select a transmit code channel from C1 to
C5, then push the [MAIN•BAND].
u Enter the desired 3-digit transmit code via the keypad.
• Push [M/CALL•MW] (Left band's) to move the cursor right; push
[V/MHz•SCAN] (Left band's) to move the cursor left.
i Push [V/MHz•SCAN] (Left band) to set the channel to "re-
ceive inhibit" or "receive accept" ON and OFF.
• When "receive inhibit" is set, "SKIP" appears.
• Code channel C0 cannot be set as "receive inhibit."
• See the table for "receive accept" and "receive inhibit" details
(p. SKIP channel).
o Repeat steps y and i to set additional transmit code
channels, if desired.
!0 Push [F F •
] to exit MENU screen.
• Receive accept/receive inhibit
➥ "Receive accept" ("SKIP" indicator does not appear) ac-
cepts pager calls when the transceiver receives a signal
with a code the same as that in the code channel.
➥ "Receive inhibit" ("SKIP" indicator appears) ignores calls
even when the transceiver receives a code the same as
that in the code channel. Transmit codes should therefore
be programmed for "receive inhibit," otherwise the trans-
ceiver will not reject unnecessary calls.
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
70