Icom IC-2820H Instruction Manual page 113

D D Voice memory recording for automatic reply
IMPORTANT!
Deactivate the dualwatch function and set minimum [VOL]
level when recording the DV voice memo.
Otherwise received audio or unwanted noise from A band is
also recorded into the voice memory.
qSelect DV mode in B band, and deactivate the priority
watch and weather alert function
(p. 83)
w Enter "REPLY VOICE" in DV voice memo set mode.
➪
MENU screen DV VOICE MEMO
(Push [MENU/LOCK]) (Rotate [DIAL]
• REPLY VOICE screen is displayed.
REPLY VOICE REPLY VOICE
REPLY V REPLY V
r
G
: PTT: PTT:
:BACK :BACK CLR:CLR CLR:CLR
eWhile pushing and holding [PTT], speak into the micro-
phone.
• Up to 10 seconds of message is recordable.
• The recording stops after 10 second or when [PTT] is released.
r Push [Ω Ω ](4) to return to DV VOICE MEMO screen.
t Push [MENU/LOCK] to return to frequency indication.
DV MODE OPERATION (Optional UT-123 is required)
if activated.
(p. 114)
➪
REPLY VOICE
† †
, then push [ï](5) .)
D D Play-back or erase the voice memory
q Push [MENU/LOCK] to select menu mode indication.
wRotate [DIAL] †
to select "DV VOICE MEMO," then push
†
[ï](5) .
eRotate [DIAL]
†
to select "REPLY VOICE," then push
†
[ï](5) .
• REPLY VOICE screen is displayed.
rTo play-back the recorded voice memory, push [ï](5).
• Push [ï](5) again to pause, push [≈ ≈ ](6) to cancel the play-back.
tTo erase the recorded voice memory, push and hold
[CLR](1) for 1 sec.
13
1
2
3
4
5
6
7
8
9
10
13
12
13
14
15
16
17
18
19
96