Icom IC-2820H Instruction Manual page 25

!1 CALL SIGN SET KEY [R>CS](TONE•DTMF) (p. ??)
Push to copy and set the previously received station call
sign as the station call sign for the call.
!2 DV MESSAGE KEY [MSG](LOW•PRIO) (p. ??)
Push to display the DV message screen.
!3 VOICE MEMORY KEY [REC](V/MHz•SCAN) (p. ??)
Push to display the DV voice memory record screen.
D Function guide 3*
The function guide 3 indications appear only when the op-
tional UT-123 is installed.
!4 !5 !6
!4 DATA KEY [DATA](V/MHz•SCAN) (p. ??)
Push to toggle the GPS data communication ON and OFF.
• "G•D" appears when the GPS data communication is set to ON.
!5 P OSITION INFORMATION KEY [POSI](M/CALL•MW)
(p. ??)
Push to display the position information screen.
!6 GPS DATA STORE KEY [G-WR](DUP•MONI) (p. ??)
Push and hold for 1 sec. to store the received position in-
formation.
!7 !8 u
PANEL DESCRIPTION
!7 G PS MEMORY RECALL KEY [GMR](TONE•DTMF)
(p. ??)
Push to select the GPS memory screen to display the
stored positon information.
!8 DV MESSAGE KEY [MSG](LOW•PRIO) (p. ??)
Push to display the DV message screen.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
8