I Your First Contact - Icom IC-2820H Instruction Manual

I Your first contact
Now that you have your IC-2820H installed in your car or
shack, you are probably excited to get on the air. We would
like to take you through a few basic operation steps to make
your first "On The Air" an enjoyable experience.
1. Turning ON the transceiver
Before powering up your IC-2820H, you may want to make
sure the audio volume and squelch level controls are set in
9–10 o'clock positions.
Set both [VOL] and [SQL] controls to 9–10 o'clock positions.
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the QC process. Resetting the CPU is necessary to start
from factory default.
[PWR]
[M/CALL•MW]
While pushing both [M/CALL•MW], turn power ON.
➥ While pushing both band's [M/CALL•MW], push and hold
[PWR] for 1 sec. to reset the CPU.
2. Selecting the main band
The IC-2820H displays 2 frequencies on left and right bands
simultaneously. However, transmission, some keys and mi-
crophone's operation are accepted for the main band only.
[MAIN•BAND]
➥ Push the desired band's (left or right) [MAIN•BAND] to se-
lect the main band.
• "Q" appears for the main band.
Using the HM-133
You can select the main band from the HM-133.
[M/CALL•MW]
QUICK REFERENCE GUIDE
Push
Push again
VIII