I Microphone (Hm-133) - Icom IC-2820H Instruction Manual

1
PANEL DESCRIPTION
I Microphone (HM-133*)
q
w
e
r
t
q VFO/LOCK KEY [VFO/LOCK]
➥ Push to select VFO mode. (p. 12)
➥ Push and hold for 1 sec. to turn the lock function ON
and OFF. (p. 15)
w PTT SWITCH
➥ Push and hold to transmit; release to receive.
➥ Switches between transmitting and receiving while the
one-touch PTT function is in use. (p. 21)
e UP/DOWN KEYS [Y]/[Z]
➥ Push either key to change operating frequency, mem-
ory channel, set mode setting, etc. (pgs. 13, 29, 56)
11
➥ Push and hold either key for 1 sec. to start scanning.
!1
!0 (p. 41)
o
r ACTIVITY INDICATOR
i
➥ Lights red while any key, except [FUNC] and [DTMF-S],
u
is pushed, or while transmitting.
y
➥ Lights green while the one-touch PTT function is in use.
t KEYPAD (pgs. 8, 9)
Mic element
y FUNCTION INDICATOR
➥ Lights orange while [FUNC] is activated—indicates the
secondary function of keys can be accessed.
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad.
u 2nd FUNCTION KEY [FUNC]
i DTMF SELECT KEY [DTMF-S] (p. 50)
o FUNCTION KEYS [F-1]/[F-2] (p. 66)
Program and recall your desired transceiver conditions.
!0 BAND KEY [BAND] (p. 11)
Push to select main band between left and right bands.
!1 MEMORY/CALL KEY [MR/CALL]
➥ Push to select memory mode. (p. 12)
➥ Push and hold for 1 sec. to select call channel. (p. 38)
✔ Important!
All keys on the microphone function for the main band only.