Icom IC-2820H Instruction Manual page 121

N Playing-back and erasing the recorded audio
qSelect DV mode in B band, and deactivate the priority
watch and weather alert function
(p. 83)
w Enter "TRACK" in DV voice memo set mode.
➪
MENU screen DV VOICE MEMO
(Push [MENU/LOCK]) (Rotate [DIAL]
• TRACK screen is displayed
TRACK TRACK
TRACK:1 TRACK:1 *
r
:SEL :SEL :
:BACK :BACK CLR:CLR CLR:CLR
eRotate [DIAL] †
to select the desired audio track to be play-
back or erased.
• "✱" is displayed beside the track number when the selected track
has been recorded.
rPush [ï](5) to play-back the recorded audio.
• Push [ï](5) again to pause, push [≈ ≈ ](6) to stop play-back.
tPush and hold [CLR](1) for 1 sec. to erase the recorded
audio.
y Push [Ω Ω ](4) to return to DV VOICE MEMO screen.
u Push [MENU/LOCK] to return to frequency indication.
DV MODE OPERATION (Optional UT-123 is required)
if activated.
(p. 114)
➪
TRACK
† †
, then push [ï](5) .)
D D DV automatic detect
The "DV" mode indicator blinks when a non-DV signal is re-
ceived during DV mode operation.
The IC-91A/91AD DV automatic detection monitors in FM
mode when other than DV mode signal is received.
q Enter "AUTO DETECT" in DV set mode.
➪
MENU screen DV SET MODE
(Push [MENU/LOCK]) (Rotate [DIAL]
wRotate [DIAL] †
to turn the DV automatic detect function ON
and OFF.
OFF : "DV" mode indicator blinks, however the trans-
ceiver receives in DV mode even if non-DV mode
signals are received.
ON : "DV" mode indicator blinks and the transceiver
monitors the signal in FM mode.
ePush [ï](5)
(or [Ω Ω ](4)) to return to DV SET MODE screen
r Push [MENU/LOCK] to return to frequency indication.
NOTE: The received FM audio may be distorted when re-
ceiving an FM signal with DV automatic detect function.
13
(p. 95)
➪
AUTO DETECT
† †
, then push [ï](5) .)
1
2
3
4
5
6
7
8
9
10
13
12
13
14
15
16
17
18
19
104